The new "Thermal-Abs"
C6 Corvette!
suspension mods for the C5 Corvette. It has been proven over and over again to reduce the
amount of torsional flex in the chassis.
The engineers at General Motors acknowledged the benefits of a stiffer more rigid tunnel plate
and improved their original design and incorporated something similar into the new C6.
We have taken their design one step further!
We have re-engineered the undercarriage tunnel plate on the C6 with strength and
performance in mind. CAD designed and computer precision cut 6061-T6 Aluminum, our 1/4”
thick “Abs-of-Aluminum” Tunnel Reinforcement Plate is two times the thickness of the stock
OEM plate. The benefits of this added thickness is a much more rigid and stiffer tunnel plate.
Therefore reducing the amount of flex in the chassis and improving the overall functionality
of the C6 suspension.
Below is a picture comparing the stock OEM C6 tunnel plate to our 1/4” thick version.
redesigned plate
In addition to improved stiffening, our plate is also offered with a Ceramic Coating to reduce
the amount of heat transfer from the exhaust into the interior console. Although the C6 does
not experience the same amount of heat transfer as the C5, some heat is still present.
● Rigidly ties the right and left inner chassis rails together
● A must for Coupes and Convertibles!
● Direct, bolt in place replacement
● Machined C6 insignia
● Greater sense of control behind the wheel when cornering
● Reduced squeaks, creaks and noises while driving
● Significantly decreases the heat transferred to the interior console
OEM tunnel reenforcement plate and bolts in place using the existing hardware.
Installation is very simple and instructions are included.
with a set of Jack Stands or Rhino Ramps.
See our installation page for more information.
